Thursday 3 December 2015

from the archives: The Marzocchi DH3

The 1995 Marzocchi DH3 was a 3" travel air sprung and oil damped down hill monster in a world full of rubber sprung and rubber damped suspension forks.


In a pre-Z1 world the DH3 was the most aggressive fork Marzocchi produced and was raced around the world by racers such as Rob Warner.


By today's standards, it very heavy and with just 26mm stanchions it is very spindly, but the ride quality is still very good, especially with the coil spring upgrade fitted.

Some DH3's had a compression knock, this was due to the build up of internal pressure when the fork initially moves. The simple solution was to drill a relief hole on the side of the damper rod about 7mm under the head.

We made a service guide which you can follow here, however the 26mm genuine forks are no longer available.

This is what Marzocchi said about it at the time:

DH3

The DH3 fork is designed specifically for downhill biking. The forged, reinforced crown, the forged T6 stanchions and the extremely rigid brake arch, combined with extended travel and controlled damping, absorb every type of shock without undermining stability.

The oversized tubes make the DH3 one of the most rigid forks on the market. As on the other models, the practical 6-position adjuster knob means the MTB can be adapted to any kind of terrain.

The DH3 was developed with disc brakes in mind, and consequently various adaptors are available

brochure page

exploded diagram

brodhure
.



2 comments:

  1. congratulations on your blog;) I'm also a fan of Marzocchi;) .Here my blog: https://metalrutilant.wordpress.com/

    ReplyDelete
  2. My cat spanked your shitty green forks too!

    ReplyDelete